800-782-5742 Talk to an expert!

SONEX® Acoustic Panel Adhesive

Sold By: The Tube
Clear
SKU: SELSON

Return Policy: 30% restocking fee within 20 calendar days of invoice date.

Typical Shipping Lead Time: 2-3 business days

Product Description

The Sonex® Acoustic Panel Adhesive has been specially formulated for use with our Sonex® acoustic foam panels. One 10.5-ounce tube installs approximately 16-24 square feet of Sonex® acoustic foam wall panels and fits into a standard caulking gun.

This non-toxic, water-based adhesive makes installation hassle-free and provides a strong, permanent bond when adhering Sonex® melamine materials to walls or ceilings. Compatible with Sonex® Panels in both polyurethane and melamine foams. Sonex® Acoustic Panel Adhesive provides easy clean-up with water.

Features

  • Non-flammable
  • Quick tack time
  • Water-resistant
  • Odorless
  • Non-toxic

Technical Information

  • Size: 10.5-ounce tube
  • Coverage: Approximately 16-24 square feet per tube
  • Part Number: PA-02
  • Storage and disposal: PROTECT FROM FREEZING. Store in a cool, dry place at room temperature. For maximum shelf life store at 75°F (24°C). Take unwanted product to an approved household hazardous waste transfer facility. Hardened material may be disposed of with trash.

Installation Method

  • Ensure all surfaces are clean, dry, structurally sound, and free of dust, grease, oil, or other debris. During installation, be sure to maintain a constant room temperature.
  • Sonex foam panels can easily be mounted to any wall or ceiling surface with acouSTIC water-based adhesive and a standard caulking gun.
  • Follow instructions on the back of tube.
  • Installation is best done at the end of the construction project.
  • Use clean gloves to prevent soiling material.
  • Melamine foam is fragile and should be handled with care.
  • Do not install material of unacceptable quality.
  • Cut nozzle at a 45-degree angle to allow for a 1/4″ bead of adhesive.
  • Puncture the seal in the base of the nozzle.
  • Apply 1/4″ bead of adhesive around the perimeter of the panel approximately 1″ from the edge.
  • Next apply a 1/4″ bead of adhesive from opposite corners through the center of the panel to form an ‘X’
  • Press panel firmly into place. Then pull panel away from the wall for approximately one minute to allow adhesive to become tacky.
  • Press the panel into its final position applying light pressure over adhesive areas.
  • Installation overhead or onto metal substrates may require additional support and cure time for adhesive to set.

For more information on our SONEX® Acoustic Panel Adhesive,
call us at 800.782.5742 or contact our sales department.

Customer Reviews