Acousti-Top™ Adhesive is an acrylic copolymer for bonding Acousti-Top™ Floor Underlayment to concrete sub floor or other Maxxon approved sub floor. This adhesive requires no mixing or dilution. It is ready to apply direct from the pail.
- Pressure sensitive adhesive
- Good surface wet-out
- High molecular weight
- High static thickens by addition of alkali
- Excellent clarity and color stability
- Exhibits early tack
- Complies with CFR 175105 (adhesives with incidental food contact)
Technical information for Acousti-Top™ Adhesive:
- Size: 5 Gallon Pail
- Material: Carboxylated acrylic co-polymer
- Coverage: Approximately 1250 square feet
- Weight: 46 pounds (8.5 – 8.7 lbs. / gal.)
- VOC Content: 1.06 gallon per liter
The sub floor shall be structurally sound, fully dry, clean and free of mud, oil, grease, dirt, dust and other contaminating factors. Do not mix or dilute with water. The adhesive is ready of use directly from the pail. If Acousti-Top™ is installed over a Maxxon underlayment, the underlayment must be dry and sealed prior to adhesive application using Maxxon Overspray or Maxxon Acrylic.
Roll 1/4″ nap roller, brush or spray adhesive at a rate of 300 square feet per gallon. Apply the adhesive in 48″ wide strips and place the Acousti-Top™ into the wet or tacky adhesive and dry roll with a standard resilient floor roller to insure 1000% adhesive coverage below the mat. This will minimize working over the adhesive throughout the installation. Rough hollow core precast plank or rough concrete may require the Maxxon underlayment slurry coat method of attachment. Isolation strips are installed around all walls, doorways, toilet collars and other floor penetrations. Seams shall be butt jointed on thin pours or may be overlapped on pours thicker than 1/2″.
Freezing may DAMAGE this product. Store in a cool, dry location at room temperature.