Rotofast Snap On Anchor (50 Pack)

Product Description

The Rotofast Snap On Anchor is an easy to use, two-part fastener system designed for use with most rigid fiberglass core acoustical panels. Whether you are a contractor or just installing the panels yourself, the Rotofast Snap On Anchors are quick and efficient to install. These mechanical panel fasteners require no glue and relatively no time-consuming measurements. The anchors simply install into the back of the panel and allow you to mark where the anchors will mount. Then screw the ratchets to the wall and push the panel into place. It’s that easy!

The Rotofast Panel Anchors may be used to fasten rigid fiberglass core panels to drywall. The panel anchor is approximately 2 inches in diameter and less than 1 inch high. The Rotofast Snap On anchors are very secure and have been testing to have a pullout strength exceeding 45 lb. in standard 6 lb./ft3 fiberglass insulation board. Each substrate (concrete block, wall board, wood) may require different types of fasteners to attach Rotofast Panel Anchors securely. The acoustical panels may contain any rigid fiberglass core (4 to 12 lbs/ft3) and be of a 1 to 4 inch thickness.

Each Rotofast Snap On Anchor 50 Pack Includes: (50) Snap on Anchors, (50) Ratchets, (50) EZ Anchors for Drywall, (50) 2 in. #8 Screws, (6) Marking Plugs, (1) Rotofast Hex Tool and installation guide. An installation guide is located in the documents tab of this web page.

Features

• Quick and efficient to install
• Saves time and money
• For use with rigid fiberglass core acoustical panels
• Works with a range of densities and thicknesses
• Pullout strength exceeding 45 lb. in 6 lb./sq. ft board

Rotofast Snap On Anchors
Each 50-pack set includes the following:
50		Snap On Anchors
50		2″ long #8 screws
50		Ratchets
50		EZ Anchors for drywall
6		Marking plugs
1		Rotofast Hex Tool

For more information on our Rotofast Snap On Anchor (50 Pack),
call us at 800.782.5742 or contact our sales department.