The ClearSonic AmpPac 20 amplifier isolation shield is used to create an enclosure for a small combo amp or speaker cabinet with an open back. Use these amp shields to control volume on stage or in the studio. This will provide better separation between instruments for recording and live sound applications.
An six section ClearSonic panel and SORBER baffles completely surround the amp.
ClearSonic products are pre-assembled, portable, and less expensive than a DIY speaker enclosure.
Here, the SORBER baffles have been attached to the inside of the 6-panel clear shield. Each section of the clear shield is 18″W x 24″H. This combination blocks sound and absorbs reflected energy before it can escape into the room. Since the top is open, some sound will still escape. For even more reduction consider the AmpPac 21.
Technical Information for ClearSonic AmpPac 20:
- Nominal Overall Size: 34″ wide x 30″ deep x 24″ high
- Intended Use: Designed for a 1×12 or 2×12 speaker cabinet
- ClearSonic Part Number: AP20
- (1) A18-6 Clear Shield
- (6) S1D SORBER (Dark Grey)
||(6) 18″ x 24″ clear shield sections (front) 108″ wide x 24″ high
||(6) 22″ x 24″ SORBER 1.6″ thick with Velcro (Dark Grey)
|Sound Absorption (Hz)
|Sound Blocking Performance (Hz)
(1/4″ Acrylic Panels)