ClearSonic AmpPac 33
Product Description
The ClearSonic AmpPac 33 amplifier isolation shield is used for a range of closed-back amps and speaker cabinets to block direct sound. Use these amp shields to control volume on stage or in the studio. This will provide better separation between instruments for recording and live sound applications.
AmpPac 33 uses the same clear shield as AmpPac 32, but adds a 24″ high Sorber baffle to the center section, and 16″ Sorber panels to each side panel.
ClearSonic products are pre-assembled, portable, and less expensive than a DIY speaker enclosure.
Technical Information for ClearSonic AmpPac 33
- Nominal Overall Size: 38″ wide x 20″ deep x 36″ high
- Intended Use: Designed for a 4×12 or 4×10 combos and cabinet
- ClearSonic Part Number: AP33
Included Parts | ||
Part # | Old Part# | Description |
AP32D | AP32 | (1) 18″ x 24″, (11) 24″ x 36″, (1) 18″ x 34″ clear shield section |
S2224 | S2D | (1) 22″ x 24″ SORBER 1.6″ thick with Velcro (Dark Grey) |
S2216 | S1D | (2) 22″ x 16″ SORBER 1.6″ thick (Dark Grey) |
Sound Absorption (Hz) (SORBER Panels) |
||||||
125 | 250 | 500 | 1000 | 2000 | 4000 | NRC |
0.29 | 0.60 | 1.11 | 1.12 | 1.10 | 1.07 | 1.00 |
Sound Blocking Performance (Hz) (1/4″ Acrylic Panels) |
||
100 | 1000 | 4000 |
-7 dB | -13 dB | -28 dB |