The ClearSonic AmpPac 40 amplifier isolation shield creates an enclosure for a range of larger amps and speaker cabinets. Use these amp shields to control volume on stage or in the studio. This will provide better separation between instruments for recording and live sound applications.
AmpPac 40 has a three section ClearSonic Panel in front, and an SORBER baffle in the back to absorb reflected sound energy. Each section of the clear shield is 2’W x 4’H. Approximate sound is reduction of 40-50%.
ClearSonic products are pre-assembled, portable, and less expensive than a DIY speaker enclosure.
Technical Information for ClearSonic AmpPac 40:
- Nominal Overall Size: 45″ wide x 30″ deep x 48″ high
- Intended Use: Designed for a 4×12 or 4×10 speaker cabinet
- Sound Reduction: Approximately 40-50%
- ClearSonic Part Number: AP40
|Part #||Old Part#||Description|
|A2448X3||A4-3||(3) 24″ x 48″ clear shield section (72″ wide x 48″ high)|
|S2444X2||S4-2D||2 section fabric hinged SORBER 1.6″ thick 48″ x 44″ (Dark Grey)|
|Sound Absorption (Hz)|
|Sound Blocking Performance (Hz)|
(1/4″ Acrylic Panels)
|-7 dB||-13 dB||-28 dB|