Due to COVID 19, Clearsonic products are experiencing longer than usual lead times. Please contact our sales department at (800) 782-5742 for more information.
The ClearSonic AmpPac 31 amplifier isolation shield creates an enclosure for a range of closed backed amps and speaker cabinets and comes with a lid. Use these amp shields to control volume on stage or in the studio. This will provide better separation between instruments for recording and live sound applications.
AmpPac 31 uses an six section clear shield with attached SORBER baffles to surround the cabinet. An 24″ x 48″ SORBER baffle acts as a lid to enclose the amp. We recommend leaving some open space in the rear of this booth for air exchange, especially for tube amps.
ClearSonic products are pre-assembled, portable, and less expensive than a DIY speaker enclosure.
Included Parts | ||
Part # | Old Part# | Description |
A2436X6 | A3-6 | (6) 24″ x 36″ clear shield sections (front) 144″ wide x 36″ high |
S2233 | S3D | (3) 22″ x 23″ SORBER 1.6″ thick with Velcro (Dark Grey) |
S2448 | STC4D | (1) 24″ x 48″ SORBER 1.6″ thick Lid (Dark Grey) |
Sound Absorption (Hz) (SORBER Panels) |
||||||
125 | 250 | 500 | 1000 | 2000 | 4000 | NRC |
0.29 | 0.60 | 1.11 | 1.12 | 1.10 | 1.07 | 1.00 |
Sound Blocking Performance (Hz) (1/4″ Acrylic Panels) |
||
100 | 1000 | 4000 |
-7 dB | -13 dB | -28 dB |