How to Soundproof: Acoustic Foam Does Not Block Sound
This title says it all, basically. I explain that acoustic foam does not block sound about 5 times a day to prospective customers wanting to know how to soundproof. The question invariably comes back, “Why not? What the heck is it used for?”
It’s not that I’m trying to ruin anyone’s day here — I would love to have foam that could stop sound from going through walls. I would sell a ton of it. But physics is physics. We are not going to sell anything to someone that has zero chance of meeting a customer’s expectations.
Now, a lot of Audiophiles and people very familiar with the nuances of sound will say: “Well if you have a relatively small confined space with a given large sound source the waves will build up and potentially amplify certain frequencies due to modal responses of the shape of container — and therefore adding absorption to the inside of said confined space will indeed reduce overall dB from escaping into the environment,” but that’s not the point, I say.
Foam does not Block Sound Transmission
The point I’m trying to make is that putting a few squares of 2″ thick foam here and there on a partition wall in an apartment will not keep someone from hearing the other guy’s TV and sub woofer at 3 AM. Even covering the wall 100% with 2″ thick foam is not going to, to the extent of the person’s expectations, stop that sound from traveling right through the wall. Acoustical foam is porous and does not block sound simply because it is porous which allows sound to pass through.
For instance, some speakers used to use foam as the speaker grille cover years ago. If foam is that great at blocking sound, then why do that? Or the old earphones on Walkmans from back in the day (I’m showing my age here). They had foam right over the head phone to make it more comfortable for the listener. The foam in both of those examples was not blocking the sound in any way. The sound just poured right through.
So if you want more information on how to soundproof and block sound, you may want to read:
Absorbing Sound And Blocking Sound
Here’s the deal, absorbing sound and blocking sound are two totally different things. Sound absorbers prevent sound from continuing to bounce and echo through out a space. This is done by disrupting the sounds path and converting the energy to heat. This is often done by using fluffy and porous materials. Blocking sound requires materials that are heavy, dense and thick. These materials are often used in multi-layered assemblies so that sound will not penetrate or pass through. Soundproofing a wall requires the structure itself to be modified.
I will explain further with some analogies. The color white “reflects” all light, right? And the color Black “absorbs” all light. What we perceive as white is simply just all colors of light mixed together, and what we perceive as black is the absence of all color. Shine a flashlight at a bright piece of tissue paper and you will register a great deal of reflectivity. Shine the flashlight at a dark black colored piece of tissue paper and you will register very little reflectivity.
However, being that it’s tissue paper, you put either the white or black paper up against the light and use a rubber band to totally cover the end of the flashlight with it, and you will register nearly the same amount of luminosity traveling through both colors of tissue paper. Maybe a tiny little less with the black… it’s not a perfect analogy. Splitting hairs aside though, the point is that sound does the same thing: It reflects off certain surfaces and it’s absorbed by other surfaces, in much the same way white reflects light and black absorbs light.
When you look at recording studios that have all this fancy foam all over the place, don’t make the assumption that it’s the foam that is blocking sound from going through the wall. It’s not. They have added layers of mass and caulk and isolation to that wall first to block the sound from traveling through, then added the foam to reduce echoes in the room for various reasons.
Reverberation Time In A Room
One of the main reasons foam, or any acoustically absorbent material (baffles, banners, fabric wrapped wall panels, etc.), are used, is to reduce the average reverberation time in a room. A good example of a space that will benefit from adding acoustical absorption is a large gymnasium. Here is an excerpt from a recent email exchange I had with a customer:
ME: “Sound goes out from its source and goes until it has simply gone through enough air that it loses energy and falls below the background noise level or below the threshold for our hearing. If there happens to be a wall, floor, or ceiling in its way before it has gone through that certain amount of air, the sound will bounce right off and head in a different direction still looking for enough air to go through before it dissipates. The louder the sound, the more air (distance) it has to go through to dissipate.”
“PA systems are a great deal louder than a person’s voice. If the sound hits a surface that is very hard and immobile, it will bounce the sound energy at nearly 100% efficiency, which means the sound from a persons voice over a PA system is literally bouncing around the room for about 5 seconds or so. That five seconds is the Reverb Time, or RT 60, of that room. People speak in a quick succession of vowels and consonants, so if the listener is hearing 5 or 10 vowel sounds still hanging in the air with 5 or 10 consonant sounds… all you hear is garble. Hanging Sound Baffles work because they are not 100% efficient at reflecting the sound — in fact they are nearly 100% efficient at NOT reflecting the sound. They are absorbing the sound reflections and therefore reducing the overall average Reverb Time.”
Examples Of Sound Absorbing Materials That Reduce Reverberation And Improve Speech Intelligibility
Improves speech intelligibility in small to medium sized rooms. Available in a range of sizes and colors.
Mounts direct to a wall or ceiling to reduce reverberation in an array of spaces. These are available in a range of patterns and colors.
Suspends from the ceiling to reduce reverberation in large open spaces. Available in a range of sizes and finishes.
These clouds suspend from the ceiling to reduce reverberation in small and large spaces.
CLIENT: “So, how do I actually go about blocking sound through a wall or ceiling or anything else?” That, unfortunately is a much bigger discussion. It takes mass, or weight, and layers of it that are mechanically disengaged from one another, and sealed up tight 100% with caulk and putties, and… etc. There is also a previous blog entry on the subject.
Mass loaded sound barriers are roll goods used to add density to wall, floor and ceiling assemblies or wrap pipes or ducts to block sound.
Combination blankets utilize absorptive quilted fiberglass with a sound barrier septum or backing to block sound. Use these to cover walls, create enclosures or used as temporary barriers. We offer both interior and exterior combination sound blanket options.
- Interior Use: PrivacyShield® ABBC-13 Barrier Backed Soundproofing Blankets
- Industrial Use: PrivacyShield® ABSC-25 Barrier Septum Soundproofing Blankets
- High-Temperature Use: PrivacyShield® ABSC-26 Industrial Barrier Septum Soundproofing Blankets
Ceiling tile barriers are installed on top of existing ceiling tiles above the grid to prevent sound from flanking over a ceiling grid. Most often used in office soundproofing.
Light Hoods are installed above a ceiling grid over light fixtures. This helps to reduce the sound transmission while still allowing the required air flow for the light fixture.
To learn more about how Acoustical Solutions can solve your noise control problems, use our contact form, call one of our Acoustical Sales Consultants at (800) 782-5742, or visit us on the web at acousticalsolutions.com.